Best Squonk RDA 2021 – 10 Bottom Feed RDAs for Flavor and Clouds

Looking for the best squonk RDA 2021? The Squonk RDA is also known as the bottom feed RDA. So if you are a beginner, don’t be confused with the terms.

The RTA sub-ohm tanks are capable of holding e-juice, but with RDA you have to drip e-juice once in few hits. An alternate option for RTA is a squonk ready RDA which allows you to build coils and also able to connect to a bottom-feeding vape mod.

A BF vape mod is designed with a squonker bottle where the e-juice is stored and for every few puffs, you can just squonk the vape juice into your Squonk pin RDA. That way you’ll be able to mimic an RTA setup in an RDA.

An RDA with a squonk pin can push your limits of vaping by its very nature of connecting to a Squonker mod which has high battery capacity and vape juice capacity.

There are numerous Squonk ready RDAs available in the market. So, choosing the best squonk RDA is not the easy one.

To help you in finding the best RDA for squonking, Here I have listed the top 10 best squonk RDAs 2021. Let’s go through the best bottom feed RDA review.

best squonk rda

10 Best Squonk RDAs 2021 – Comparison

Squonk RDAsDiameterCoil TypePrice
1. Goon LP RDA by 528 Custom Vapes24 mmSingle and Dual
2. Dead Rabbit RDA by Hellvape & Heathen24 mmSingle and Dual
3. Tsunami 24 RDA by GeekVape24 mmSingle and Dual
4. GAS MODS G.R.1 22MM BF RDA22 mmSingle
5. Vandy Vape Bonza RDA Vape Tank24 mmSingle
6. AUGVAPE TEMPLAR 24MM BF RDA24 mmSingle and Dual
7. DIGIFLAVOR X VAPOR DROP 24MM RDA24 mmSingle and Dual
8. VANDY VAPE PHOBIA 24 BF RDA24 mmSingle and Dual
9. Vandy Vape Pulse 24 BF RDA by Tony B24 mmSingle and Dual
10. WOTOFO NUDGE 24MM RDA24 mmSingle and Dual

Best Squonk RDA 2021 – Review

1. Goon LP RDA by 528 Custom Vapes

best squonk rda

I’ve tried many bottom feeder RDAs since I started vaping and I have to say I’m extremely impressed with this RDA.

Yes! This is the best Squonk RDA I have used! Great flavor, quality materials and easy to build on. I fell in love with the deck and everything about it.  The 1st couple of builds are a bit tricky but you get used to it.

You can put any size coils in this sucker. The airflow on this RDA is amazing and the deck is nothing but consistent. This is a strong and sturdy squonk ready RDA which is capable of becoming your most liked everyday squonker RDA.

The exterior is made of high-quality stainless steel chassis, the primary focus of this Squonk pin RDA is to satisfy the requirements of vapers who like Single and dual coil RDA.

Since the Single and dual coil RDA is built with a diameter of 24mm, it can be connected to most of the squonker mods out there without any overhangs.

The inner diameter of this squonk pin RDA is 20mm which is pretty big to build your choice of single or dual coil build easily.

The two-post build deck of this Squonk ready RDA has vast space for coil building, the two post clamp style deck is easy to build extra-large coils for improved contact with wicks to burn more vape juice efficiently.

This RDA for squonking has dual adjustable air slots which are 12mm by 3mm and is pretty comfortable for direct lung hits when closed fully, you can get a better mouth to lung vaping.

Features and Specs
  • 10mm by 3mm air slot
  • 10mm Wide Bore 810 Delrin Drip Tip
  • 12mm by 3mm Each Airslot
  • 20mm Inside Diameter Build Deck
  • 24mm Diameter
  • 4mm of Width Between Screws
  • 7mm Deep Juice Well
  • Clamp Style Posts
  • CNC Engraved
  • Copper 510 Contact
  • Dual Adjustable Airslots
  • Easily Secure Very Large Leads
  • High-Quality Stainless Steel Chassis
  • PEEK Insulation
  • Purpose-Built for Builders
  • Single Coil Compatible
  • Stainless Steel Posts
  • Three Piece Assembly
  • Two Phillips or Flathead Screws Per Post
  • Two Post Build Deck
Pros
  • Great airflow
  • Easy to build a deck
  • Higher inner diameter
  • Compatibility with most mods without overhangs
  • High-quality stainless steel construction
  • Tons of flavor and huge clouds.
Cons
  • No 510 adapter for the drip tip

This is the best Squonk ready RDA on the market! The coil building is very easy, the build deck has sufficient space for coil building, paired with 7mm juice well and efficient air slots. I would recommend anyone looking to expand beyond tanks to get this bottom feed RDA simply for the ease of use.

2. Dead Rabbit RDA by Hellvape & Heathen

best bottom feed rda

Dead Rabbit RDA is from the veterans Hellvape and Heathen to satisfy the end-user with a convenient design and sturdy construction. Pretty much the best RDA you can buy for the cost.

Amazing quality on every inch, the looks are top notch and once you get over the initial unique building style required to get some coils on this thing, you will not go back. I like this RDA. Flavor and cloud production is on point.

This Squonk ready RDA makes your coil building pretty easy and seamless with its vast inner diameter, you will be able to build single or dual coils to your desire.

Many of the experienced vapers used to like the four-post build decks due to its convenience while building large single and dual coil setups.

The side-mounted screws make it more easy to screw in the coils. The best part of this RDA for squonking is that it has 2.5mm terminal openings which can accommodate your huge coils comfortably.

The 5mm well in this Squoner RDA helps in easier saturation of your wicks and also holds enough juice for several deep hits. Gold plated bottom feed pin has improved seamless connectivity to your vape mod. The overall construction is also durable and long-lasting.

It includes 810 resin and Delrin wide bore drip tip, a 510 drip tip adapter is also included in the package, which means you can use any of your favorite 510 drip tips with this Squonk pin RDA.

Features and Specs
  • A Vapin’ Heathen Project
  • 24m Diameter
  • Deep Juice Well
  • Superior Stainless Steel Construction
  • Elevated Postless, Quad Terminal Design
  • 5mm Terminal Openings
  • Side-Secured via Slotted or Hex Flathead Screws
  • Gold-Plated Positive Posts
  • PEEK Insulated Block
  • Single or Dual Coil Configurations
  • Dual Slotted Top-Side Airslots – Diagonal Orientation
  • 810 17mm Wide Resin Drip Tip
  • 810 16mm Wide Delrin Drip Tip
  • 510 Drip Tip Adapter
  • Squonk-Ready Bottom-Feeding 510 Pin
  • Gold-Plated 510 Contact Pin
  • Available in Stainless Steel, Full Black Out, Red, Blue, Purple, Gunmetal, Gold, Rainbow
Pros
  • Two drip tips plus 510 drip tip adapter included in the kit
  • Single or dual coil configurations
  • High-quality durable construction
  • Large build deck with a great layout for your big coils
Cons
  • Not suitable for MTL vaping
  • Too airy for some users

This is one of the best single or dual coil RDA for squonking. The gold plated squonk pin offers you seamless connectivity and the convenient four-post design makes this one of the best Squonk ready RDAs in the mid-price range.

3. Tsunami 24 RDA by GeekVape

bottom feed rda

Tsunami 24 RDA by geek vape is an excellent Squonk ready RDA with a simple exterior look, made of sturdy stainless steel for long-lasting performance. My favorite low-cost RDA! The building deck is amazing and easy to use.

The design of this RDA is just awesome. Great bottom feed RDA for starters! Construction is top-notch! The clamp style posts are easier to build on than I thought.

This is one of the best Squonk pin RDAs for everyday use, comes in black and stainless steel color choices. Velocity style build deck is considered to be the best for serious coil builders, the convenience level goes a little higher compared to other build decks.

Though the Squonk pin RDA has a height of 29.5mm, this configuration is optimal for almost all vape mods to use without any overhangs.

The juice well can hold 2.5ml of vape juice according to the manufacturer of this Squonk ready RDA, the juice well is about 6.5mm in-depth and was able to hold around 20 drops of high VG vape juice with the wicks on it.

But if you want to fill it to this squonks RDAs fullest capacity you might be facing juice leaks issues, it’s always better to fill only half or little more to half. That way you’ll be able to get about five to six deep puffs. The airflow is slightly high, MTL vapers might want to close the slots to get what they want.

Features and Specs
  • 5ml Juice Well
  • 6mm Height Dual Slots
  • Adjustable Kennedy Style Deck
  • Improved Velocity Styled Deck
  • Three Style Drip Tips
  • Height: 29.5mm (thread excluded)
  • 1 x 12.5mm SS 510 Drip Tip
  • 1 x 14.2mm Wide Bore Drip Tip
  • 1 x 14.5mm diagonal Delrin drip tip
Pros
  • Velocity style build deck
  • Flawless precise construction
  • Three style drip tips
  • Excellent build, nice engravings
  • Nice drip tips included
Cons
  • Airflow is slightly high
  • Occasional vape Juice overflows

Though this Squonk ready RDA has few minor setbacks, the overall performance is pretty admirable. If you’re a person who wants the best Squonk pin RDA with better durability and nice aesthetics, this is a good choice for you.

4. GAS MODS G.R.1 22MM BF RDA

best squonking rda

Gas mods G.R.1 is a small yet potential bottom feeder RDA which is built without any logos or names on the top cap. The build deck so easy to build and adjust the coils to fit your taste. The Airflow is super smooth. The juice well is nice and deep with a squonk pin makes it easier for me to go setup.

It has a discreet outlook when used with a stealth compatible vape mod, this is the best squonk ready RDA which can partner well for the stealth vaping.

Though it is small in size, the single-coil RDA is pretty potent in terms of clouds and flavors. The postless Single coil deck allows you to build your coils on board. The convenience is not at par with other decks, but still, it is comfortable enough to build without any glitches.

When built and equipped to fire, it can satisfy any MTL vaper or restricted lung hit vaper. This BF RDA has a unique airflow system, two air slots are placed on each side and the air is routed to your coils directly through jet styled funnels.

The pre-installed funnels give you tight draws for MTL vaping, you also have additional funnels included in the kit which are wider, but again it’s not as good for direct lung hits.

The design itself is clearly showing that this squonk ready RDA is built primarily focusing on flavor production.

Features and Specs
  • 22mm Diameter
  • Dual Terminal Post-less Style Build Deck
    • 1mm Each Terminal
    • 4mm Deep Juice Well
    • Juice Flow Splitter in Center
    • PEEK Insulator
  • Interchangeable Slanted Airflow Jets
    • Two Airflow Jets Per Side
      • 1mm Diameter Per Jet
      • Directs Airflow Directly Onto Coil
    • Two Wide Airflow Jets Per Side
      • 5mm Diameter Per Jet
      • Directs Airflow Directly Onto Coil
    • 24K Gold Plated Bottom Feed 510 Contact
    • 304 Stainless Steel
    • 11mm Bore POM 510 Drip Tip
Pros
  • Discreet and simple outlook
  • Durable and long-lasting performance
  • Efficient Airflow system for nice flavors
Cons
  • Not suitable for Direct lung hits
  • Need to pass the learning curve to build on this unique postless deck

This is one of the best Squonking RDAs which looks discreet and can be paired with a discreet mod for stealth vaping. If your choice is flavor and MTL vaping, this is the best Squonk pin RDA at an affordable cost.

5. Vandy Vape Bonza RDA Vape Tank

best rda for squonking

Bonza RDA is designed and crafted by Vandy vape and The vaping bogan, both the veterans succeeded in giving the best Squonk ready RDA for coil building and sub-ohm vaping. I got this RDA to sit on my pulse bf box and it’s amazing. Not sure how it is as a regular RDA but as a squonker it’s awesome.

The outlook is pretty simple with the Parallelogram air slots on each side and the logo engraved on the tank’s surface. The overall construction of this Squonk pin RDA is made of sturdy stainless steel which is durable to attain the best possible service life.

It has a unique two-post design with a fixed screw clamp post, it is easier to build than explain, better convenience than most two-post designs.

This Squonker RDA has a 7mm deep juice well which augurs well with the wicks and is efficient on holding a lot of vape juice, this squonk pin RDA can give you at least six to seven deep hits with its deep juice well.

This Single coil RDA can easily be your everyday vaping device if your choice of vape is cloud chasing, with the bigger holes on the posts, you’ll be able to build huge single coil setups, thus you can produce excellent flavors paired with huge clouds.

Features and Specs
  • 16mm Wide Delrin Widebore Drip Tip
  • 5mm Wide 810 ULTEM Widebore Drip Tip
  • 18mm Wide 810 Resin Widebore Drip Tip
  • 24K Gold-Plated Build Deck
  • 24mm Diameter
  • 510 Drip Tip Adapter
  • 7mm Deep Juice Well
  • Collaboration between Vandy Vape & The Vaping Bogan
  • Direct-to-Coil Chamber Effect
  • Gold-Plated 510 Connection
  • Inner Terminals – Top-Secured via Clamp Mechanism
  • Outer Terminals – Top-Secured via Slotted Flathead Screws
  • Parallelogram Airslots on Each Side
  • Squonk-Ready 510 Pin
  • Superior 303 Stainless Steel Construction
  • Unique Two-Post Design – Fixed Screw Clamp Post Design
Pros
  • Versatile drip tip options included
  • Durable and sturdy construction
  • Best Single coil RDA setup
  • Easy to build-on deck
  • Deep juice well
Cons
  • Wish it had more color selection
  • No bottom airflow,

This is one of the Best single-coil Squonker RDAs, which is capable of accommodating huge single coil builds easily. The deep juice well when paired with a squonker mod, can support you push your limits on sub-ohm vaping and cloud chasing.

6. AUGVAPE TEMPLAR 24MM VELOCITY CLAMP SNAP SYSTEM BF RDA

rda with squonk pin

AugVape Templer is a good looking small Squonk ready RDA for single and dual coil vape setups. I’m usually an RTA vapor but this RDA is awesome for squonking airflow adjusting is great! The flavor is more then I was expecting. So easy to set up.

It has three color choices, you can choose between blue, black and stainless steel. It has the logo and the name of the brand printed on it, the sturdiness and durability can be felt just by holding this Squonker RDA in your hands.

The base has a convenient and most received velocity clamp snag system, you can build your single-coils and dual coils with utmost convenience with the clamp snag system. The 24mm squonk pin RDA sits comfortably on most mods without any overhang issues.

The adjustable dual air slots in this RDA for squonking allows you to get the best airflow settings with it’s two different sized slots, one is with 3mm by 1mm long and another one is 2mm by 1mm short air slots.

This Squonk ready RDA ‘s airflow can be adjusted via the top cap. When it comes to vape juice capacity, this Squonk RDA has 4mm deep juice well which is not bad at all for sub-ohm vaping.

The 810 drip tip fitment comes with a Delrin drip tip, you also have a 510 drip tip adapter for your other existing favorite drip tips.

Features and Specs
  • 2 Post Build Deck
  • 24K Gold Plated 510 Contact
  • 24K Gold Plated Build Deck
  • 304 Stainless Steel Construction
  • 4mm Deep E-liquid Well
  • 510 Drip Tip Adapter
  • 810 Drip Tip Fitment
  • Adjustable Dual Airflow Slots
  • Build Friendly
  • CNC Machine Engraved
  • Diameter: 24mm
  • Frosted Top Cap Redirect Flow
  • PEEK Insulator
  • Rounded Internal Top Cap
  • ULTEM Single Coil Chamber Reducer
  • Velocity Clamp Snag System
Pros
  • Best airflow settings
  • Velocity clamp snag system
  • Included 510 drip tip adapter
  • Good RDA for flavors
Cons
  • Not suitable for stealth vaping
  • Cleaning this Squonk ready RDA is a bit tedious
  • The clamp never feels secure on all 4 legs.

This is a good choice for people who are looking for a convenient Squonk ready RDA for coil building, the compatibility of this Squonk RDA is in a wide range. This is the best Squonk pin RDA in terms of durability and performance

7. DIGIFLAVOR X THE VAPOR CHRONICLES DROP 24MM RDA

best single coil squonk rda

Drop RDA is from Digiflavor and Vapor chronicles in collaboration, the exterior look is stylish and it comes in black, gold, and stainless steel colors. I would recommend the drop to anyone looking for an RDA. It’s super easy to build on with great flavor and clouds.

The construction of this Squonk pin RDA is made with strong and sturdy materials. This 24mm bottom feed RDA is one of the best choices for people looking for a convenient four post build deck.

The inner diameter is pretty big and allows you to build your single or dual coils comfortably and easily. The deck style is perfect for all, even a beginner will not find it difficult to build coils.

This Squonk ready RDA has a 5mm deep juice well, which saves refilling for every few hits, the stepped airflow design’s functionality is notable and it is capable of giving you both MTL and DTL vaping with dense vapors.

This bottom feeder RDA has 810 drip tip fitment and comes with the included 9mm bore acrylic drip tip and 10mm bore Ultem drip tip. It also has a 510 drip tip adapter which enables you to use your favorite 510 compatible drip tips.

Features and Specs
  • Design Collaboration by Digiflavor & The Vapor Chronicles
  • 5mm by 2.5mm Terminal Openings
  • 24mm Diameter
  • 510 Drip Tip Adapter
  • 510 ULTEM Widebore Drip Tip
  • 810 SS Widebore Drip Tip
  • A TVCreation Project
  • Conical Top Cap Design – Flavor Enhancement
  • Deep Juice Well
  • Gold-Plated 510 Connection
  • Horizontal Side Airflow Control – T-Shaped Patterns
  • Innovative Four-Post, Single Terminal Design
  • Side-Secured via Slotted Flathead Screws
  • Single or Dual Coil Configurations
  • Squonk-Ready 510 Bottom-Feeding Pin
  • Superior Stainless Steel Construction
  • Available in Stainless Steel, Black, Matte Black, Gunmetal, Gold, Blue
Pros
  • Unique and efficient Airflow settings
  • Four post deck
  • 5mm deep juice well
  • Good bottom feeder for beginners
Cons
  • Draws becomes tighter when the airflow is fully closed

This is the best squonk ready RDA for people looking for a convenient four-post coil deck. Coil building is very easy with this Squonk pin RDA. If your choice of vaping needs a huge deck and deep juice well, this is the best bottom feed RDA for the money!

8. VANDY VAPE PHOBIA 24 BF RDA

best dual coil squonk rda

Phobia RDA is a designed and crafted by Vandy Vape and Alex from VaporsMD, the outlook is not so unique, but still, this is a stylish looking squonk ready RDA with the logo engraved on the tank’s surface.

It comes in three color choices, you can choose among Gold, Rainbow and stainless steel. The 24mm squonk pin RDA comes with Dual central airflow system which is capable of providing you with versatile airflow settings, you can stop worrying about the airflow issues.

This RDA for squonking possesses a post less atomizer deck with four terminals. The four terminals in this Squonk ready RDA has 3mm holes in each terminal to accommodate even the biggest coil setup.

This squonker RDA has a 5mm deep juice well, it help you reduce frequent squonking, the juice flow splitter in the center makes this a leak-proof Squonk RDA, it has an 810 compatible drip tip and comes with an 11mm bore Delrin drip tip.

It also has a 510 drip tip adapter which allows you to use any of your favorite drip tips with 510 compatibilities. The overall construction is sturdy enough to be a heavy-duty everyday vape device.

Features and Specs
  • 24mm Diameter
  • 810 6mm Wide ULTEM Drip Tip
  • 810 Drip Tip Adapter
  • 810 ULTEM Chuff Cap
  • Available in Stainless, Black, Gold, Rainbow
  • Collaboration between Vandy Vape & Alex from VapersMD
  • Deep Juice Well
  • Direct-to-Coil Chamber Effect
  • Dual Bottom External Airslots
  • Gold-Plated 510 Connection
  • Replaceable Wall Sleeve Design
  • Side-Secured via M4 Hex Screws
  • Single or Dual Coil Configurations
  • Spacious Build Deck
  • Squonk-Ready 510 Pin
  • Superior 303 Stainless Steel Construction
  • Two Internal Airflow System – Two Bottom Tubes & Two Slanted Side Tubes
  • Unique Postless Design – Four Terminals Openings
Pros
  • Bottom Airflow design
  • 810 and 510 compatibilities for the drip tip
  • 5mm deep juice well
  • Good beginner RDA for squonking
Cons
  • Tend to suck a lot of vape juice
  • Too airy for a few users

This is one of the best squonk pin RDAs for people who are looking for an easier post less quad terminal deck, the deep juice well and efficient airflow settings together make this one of the best Squonker RDA at the low price range.

9. Vandy Vape Pulse 24 BF RDA by Tony B

24mm squonk rda

Vandy Vape’s Pulse is a bottom feed RDA which is designed and crafted perfectly to satisfy the vaping needs of any beginner or expert vaper. Large build deck made it easy to use, airflow is amazing and I highly recommend it for beginners.

You have five color choices on this RDA for squonking, you can choose among Gold, black, matte black, rainbow and stainless steel. The overall construction is made of high-grade materials and can last for years of heavy-duty use.

This Squonk ready RDA has a postless deck design to build coils with dual terminals, you can build single coil or dual coils in this Squonk pin RDA.

Unlike other postless decks, this squonker RDA has one of the best decks for the easiest coil building. The juice well in this Squonk ready RDA is 7mm deep and can provide you with seven to eight full puffs.

The slanted Jet funnel adjustable top airflow efficiently does the job and also leak-proof due to it’s raised angle design. This squonker RDA has two airflow jets each side, you can adjust it depending on your vape setup to get MTL or DTL vaping.

Since the airflow is directed on the coil itself, you’ll get the accurate changes in the airflow even on the slightest adjustment.

Features and Specs
  • 11mm Bore ULTEM Drip Tip
  • 5mm Each Terminal
  • 24K Gold Plated 510 Contact
  • 24mm Diameter
  • 304 Stainless Steel
  • 3mm Diameter Per Jet
  • 7mm Deep Juice Well
  • 810 Drip Tip
  • Directs Airflow Directly Onto Coil
  • Dual Terminal Post-less Style Build Deck
  • Gold Plated Deck and Screws
  • Juice Flow Splitter in Center
  • Keeps Airflow Parallel to Coil
  • Locking Midsection
  • PEEK Insulator
  • Side Mounted Phillips Screws
  • Single or Dual Coil Capability
  • Slanted Jet Funnel Adjustable Top Airflow
  • Two Airflow Jets Per Side
Pros
  • Great features in a cheap price range
  • Efficient Airflow settings
  • 7mm deep juice well
  • Good beginner RDA for squonking
Cons
  • Occasional vape juice leaks

Given the price point, this is one of the best squonk ready RDAs with great capabilities. The postless deck, 7mm deep juice well and the efficient airflow settings together make this the best Squonk pin RDA in a cheap price range.

10. WOTOFO NUDGE 24MM RDA

best bf rda squonking

Wotofo Nudge is one of the smallest and cutest RDAs with a curvy exterior, this bottom feed RDA looks better than many top rated squonk RDAs. It comes in five color choices, you can choose among red, blue, green, black and stainless steel.

This Squonker RDA has a unique build deck design with three posts and dual terminals in one post and a single terminal in two posts. The ‘z’ type deck allows you to build single or dual coils as per your vaping needs. This squonker RDA’s sturdy stainless steel construction adds to the durability.

The 6mm deep juice well in this Squonk pin RDA holds enough of the juice to provide you with several deep pulls, the double-O-ring secures the tank from any leaks.

The side airflow system is not adjustable, it has 7mm by 3mm air slots which tend to be too airy for MTL vapers. Since this squonk ready RDA doesn’t have adjustable airflow settings, this may not be suitable for MTL vaping.

t comes with an 810 Ultem wide bore drip tip and a 510 drip adapter, so you can continue using your existing favorite 510 drip tips.

Features and Specs
  • Collaboration between Wotofo & Suck My Mod
  • 24mm Diameter
  • 24K Gold-Plated 510 Connection
  • 510 Drip Tip Adapter
  • 810 Delrin Widebore Drip Tip – for SS, Black, & Gunmetal
  • 810 Resin Widebore Drip Tip – for other colorful versions
  • Available in Stainless, Black, Gunmetal, Red, Blue, Green
  • Bifunctional E-Juice Splitter Design
  • Deep Juice Well
  • Direct-to-Coil Chamber Effect
  • Dual Slotted Airflow Delivery
  • PEEK Insulators
  • Squonk-Ready Bottom-Feeding 510 Pin
  • Superior 316 Stainless Steel Construction
  • Top-Secured via Phillips Screw
  • Unique Staggered Z-Post Build Deck Design
Pros
  • Three post deck design
  • Leak-proof
  • Good beginner RDA for squonking
  • 6mm deep juice well
Cons
  • Not suitable for MTL vaping
  • No Airflow adjustment settings

This is one of the best bottom-feed RDAs at the cheapest price point on our list. Except for the airflow settings, the accessories included and the convenient build deck paired with deep juice well makes this the best Squonk ready RDA in cheapest price point

Best Squonk RDA 2021 – Buying Guide

Vaping kits are evolving every day in the presence of so many RDA tanks hitting the market with a lot more advanced features.

When it comes to expert vaping, people are keen on high battery backup, TC, VW and large tank capacity for sub-ohm vaping, chain vaping and high wattage vaping.

What to look for in the Bottomfeeder RDA?

Bottom feeder RDA tanks and mods are traditionally being used, even before the latest sub-ohm mods, these squonk RDAs were the passion of the vaping community.

Squonk RDAs are a very unique and purposeful design that changed the way RDAs were used. An RDA needs to be dripped very often to continue vaping, dripping is easy but still, squonking is easier.

Squonker RDAs was designed frequent vapers and chain vapers in mind, but slowly people who were fond of building coils with RDAs for flavors started using Squonk ready RDAs, as it is more convenient for on the go vaping.

How Squonk RDAs work?

A squonk mod with a bottom feed juice bottle is placed inside the squonk mod just below the 510 connection, a small tube from the bottom feeder passes through the tiny hole in the middle of the 510 pin and connected to the squonk ready RDA.

So when you squeeze the squonker bottle the e-liquid is pushed into the juice well of the Squonker RDA, so instead of dripping for every few hits,s you’ll just squeeze the bottle to push vape juice to the squonk ready RDA. That way you can keep vaping on extended vaping sessions on your favorite single or dual coils.

When it comes to compatibility, recently most of the RDA brands have introduced RDA tanks with a removable squonker pin.

If you want to use the RDA with a Squonker mod then you can fit in the squonk pin into the RDA and connect it to your Squonker mod, else you can remove the squonker pin and use it with a regular box mod.

The only difference is that you have to drip vape juice regularly in your RDA’s juice well for every few hits and keep it wet to avoid dry hits.

In a Nutshell,

To select the best squonk ready RDA, you should be thoroughly aware of the functionalities and compatibility parameters of a squonker pin RDA, try and spend some time on reading reviews on best Squonk ready RDAs to understand it’s specs and features.

I hope the review about the best bottom feed RDA helps choose your best squonk RDA 2021. Happy Vaping!!!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top